• 서브 비주얼 01
  • 서브 비주얼 02
  • 서브 비주얼 03

CS CENTER

02.951.1353

fax : 02-951-1356
postmaster@yuillab.com

am 09:00 ~ pm 18:00

설치형 정수,하수 수질 연속 측정기
Contini

[분류1 : 하수용 수질 연속 측정기
for waste water]

TurbiTechw2 LS Suspended Solids and Turbidity Sensor

TurbiTechw2 LS Suspended Solids and Turbidity Sensor
TurbiTechw2 LS Suspended Solids and Turbidity SensorTurbiTechw2 LS Suspended Solids and Turbidity SensorTurbiTechw2 LS Suspended Solids and Turbidity SensorTurbiTechw2 LS Suspended Solids and Turbidity Sensor
제품명TurbiTechw2 LS Suspended Solids and Turbidity Sensor
제조사/제조국
PARTECH/U.K
조달청 물품 목록 번호
조달청 물품 식별 번호
조달청 군급 목록 번호
특징- APPLICATIONS
Final Effluent Turbidity
Final Effluent Solids
Inlet Solids
Primary Settled Sewage
Surface Water

- MEASUREMENT PRINCIPAL
90° Light Scatter
IS0 7027 Compliant

- FEATURES
Fully automatic Self Cleaning
Flexible Mounting System
Large Optical Surface

- BENEFITS
Automated Aeration Control
Low Cost of Ownership

- COMPATIBLE MONITOR
7300w² Monitor

Physical
Dimensions  : 80 mm diameter x 470 mm long
Weight  : 2.2 kg (inc 10 metres of cable)
Protection Class :  IP68
Enclosure Material :  Black Acetal Co-Polymer
Cable Entries :  Integral Cable Gland
Wetted Parts : Black Acetal, 316 Stainless Steel, Glass
Seal Material  : Polyurethane and Nitrile (Viton option)
Cable Type : 4 core, 2 Twisted Pair, 5mm O/D Polyurethane Coated
Cable Length  : 10 metres standard, 100 metres maximum
Service Requirement :  Automatic Self Cleaning Seal Service every 3500 cleans (application dependent)

Environmental Data
Operating Temperature :  0 to 50°C
Storage Temperature  : -20 to 60°C
Location  : Indoor/Outdoor

Electrical
Power Supply  : 12 VDC from Monitor

Interface to Monitor
Type :  RS485

Measurement
Accuracy  : Better than +/-5% FSD on real sample
Resolution  : Dependent on range setting, typically +/-2%
Repeatability  : Better than +/-1% FSD on real sample
Measurement Principle  : 90° Light Scatter, IS0 7027 compliant
Wavelength/Frequency  : 860 nm Infrared
Response Time  : 0.5 seconds - damping provided by monitor
Pressure Rating (Depth)  : 10 mWC
Flow Rate  : Not affected by flowrate, avoid dead spots and extreme turbulence
Maximum Range  : 0 – 500 FTU, extended range 0-1,000 FTU available
Minimum Range : 0 – 50 FTU Suspended Solids measuring range will depend on the nature of the sample being monitored.
                          Typically Maximum 0 – 500 mg/l Minimum 0 – 50 mg/l

해당 제품에 대한 상세정보 및 사용방법에 관한 메뉴얼

-. 언어: 한국어

-. 파일이 열리지 않을 경우, 뷰어프로그램의 확인 및 설치가 필요합니다. 

    뷰어프로그램 : PDF / DJVU / E-Book / CHM / ZIP 

메뉴얼 다운로드

담당자 :유일랩테크
연락처 :02-951-1353
이메일 :postmaster@yuillab.com
  • 페이스북 공유
  • 트위터 공유
  • 밴드 공유
  • Google+ 공유
  • 인쇄하기